Payday Loans
payday loans
 

Műanyag és Gumi

  • Increase font size
  • Default font size
  • Decrease font size
Mainpage 2014 March Contents
E-mail Print PDF

Contents - March 2014

Kapitány, Ákos; dr. Macskási, Levente: Engineering plastics of Celanese on K 2013Acrobat-Reader-icon_48x48

Celanese appeared on K 2013 under slogan 'The chemistry inside innovation™' and showed its plastics industry related activity. In this article, Hostaform POM, Fortron PPS and Riteflex and Thermx thermoplastic polyesters as well as applications of Celstran polymers are described.

Dr. Ronkay, Ferenc, Kasza, Dóra: Development of engineering material based on recycled PETAcrobat-Reader-icon_48x48

Mechanical properties of recycled PET were modified by short glass fiber reinforcement and reactive impact modifier. The developed material has sufficient impact strength and tensile modulus for technical applications as well.

Green polyethylene available in Hungary tooAcrobat-Reader-icon_48x48
Dr. Macskásiné Éltető, Éva: Trends in the world's plastics industry during K 2013. IV. Biopolymers as future alternatives Acrobat-Reader-icon_48x48

The Press Service of K 2013 International Trade Fair in Düsseldorf asked plastic industrial experts – as usual – to present the new achievements of their field to journalists invited to the trade fair. This series was prepared on the basis of the reviews made by them. The fourth part discusses biopolymers as future alternatives.

Dr. Lehoczki, László: Bioplastics – going greenAcrobat-Reader-icon_48x48

Bioplastics market grows above average to 2017. Strongest gain is expected in the biobased, nonbiodegradable bioplastics group. Biobased versions of bulk plastics in particular are significantly increasing capacities. The packaging market will remain the leading segment for bioplastics applications.

Niedermann, Péter; dr. Toldy, Andrea: Effect of alkali treatment of jute reinforcement on the mechanical properties of epoxy resin compositesAcrobat-Reader-icon_48x48

In the case of jute fabric reinforced epoxy resin composites cured with anhydride no improvement of mechanical properties could be detected with the NaOH treatment methods, however, the Tg values increased significantly. In the case of amine type curing agent the removal of lignin and hemicellulose from jute fabric was successful, however, the remarkable decrease of mechanical properties suggests that degradation occurred even after fiber treatment.

Pataki, Tamás; dr. Szakál, Zoltán: Mechanical load tests of carbon nanostructures for polymer strengtheningAcrobat-Reader-icon_48x48

In this article we present briefly how the carbon nanotube structures can influence the characteristics of plastics with their excellent mechanical properties. We present a theoretical analysis for the nanostructures which have one or more weak cross-sections. These structures contain nanotube sections and nanotube junctions, too.

Dr. Czifrák, Katalin; Verner, Erika; dr. Karger-Kocsis, József; dr. Zsuga, Miklós; dr. Kéki, Sándor: Shape memory polymers (SMP) in our daysAcrobat-Reader-icon_48x48

The shape memory effect of polymers can be induced by several external stimuli, such as heat, light, magnetic field etc. The application area of SMPs and related composites is wide, spanning from medical applications to space-technology. Polyurethanes represent the most versatile family of SMPs, since their synthesis is relatively simple via which the properties can be tailored. This paper introduced the working principle of SMPs and surveyed their applications and recent developments, including ours.

News Acrobat-Reader-icon_48x48
Plastics Acrobat-Reader-icon_48x48
Last Updated on Thursday, 03 April 2014 10:40  

Choose language

MagyarEnglishDeutsch

Express Polymer Letters

  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow